Click on the image to check the artwork
EJA118N Diaphragm Sealed Differential pressure transmitter
Features :
Yokogawa Model EJA118W, EJA118N and EJA118Y Diaphragm Sealed Differential Pressure Transmitters can be used to
measure liquid, gas, or steam flow, as well as liquid level, density, and pressure. They output a 4 to 20 mA DC signal
corresponding to the measured pressure differential. The transmitters also feature remote setup and monitoring
through communications with the model BT200/100 BRAIN TERMINAL, CENTUM CS/XL system etc.
Specifications :
Accuracy:
See Table 2-1, 2-2 and 2-3.
Ambient Temperature Limits:
-40 to 60 C (-40 to 140 F) (general-use type)
-30 to 60 C (-22 to 140 F) (with integral indicator)
(Note : The ambient temperature limits must be within the
fill fluid operating temperature range, see table 1.)
(See ‘Optional Specifications’ for Explosion-protected
types)
Ambient Temperature Effect:
See Table 2-1, 2-2 and 2-3.
Process Temperature Limits:
See Table 1.
(See ‘Optional Specifications’ for Explosion-protected
types)
Ambient Humidity Limits:
5 to 100 % R.H.(at 40 C)
Working Pressure Range:
2.7 kPa abs{20 mmHg abs} to flange rating pressure.
For atmospheric pressure or below, see Figure 2.
Static Pressure Effect:
See Table 2-1, 2-2 and 2-3.
Power Supply Effect “”:
0.005 %/V(21.6 to 32 V DC, 350 )
Mounting:
Transmitter; 2-inch pipe mounting
Diaphragm seals; flange mounting
Mounting Flange Rating:
See ‘Model and Suffix Codes.’
Flanges conforming to ANSI are serrated on their gasket
surfaces (ANSI B16.5).
Note: For model EJA118W wetted parts material code H, T,
or U, no serration is worked.
Degrees of Protection:
IP67, NEMA4X, JIS C0920 immersion proof
Explosion-protected Construction:
See ‘Optional Specifications.’
Electrical Connection:
See ‘Model and Suffix Codes.’
Technical parameters :
Products show :
Why chose us :
